Stihl Gas Chainsaw MS 362 C-M VW

Contact us for pricing

The MS 362 VW – Arctic™ now comes equipped with M-Tronic™ – STIHL’s electronic engine management system for optimum engine power at all times – and is part of STIHL’s new generation of fuel-efficient, low-emission chain saws. Featuring stratified scavenging engine technology which reduces fuel consumption by up to 20% and fullfils all emission regulations, plus heated handles and carburetor for optimal performance under the most extreme weather conditions. This unit also features a new long-life air filtration system, an advanced anti-vibration system and an excellent power-to-weight ratio. This chain saw is the perfect unit for demanding professionals for daily forest work. All versions below are available with wrap handle.

 

Request Information

  • This field is for validation purposes and should be left unchanged.

Call us at 1.866.344.SAWS (7297) for more info.

Contact Woodsman Equipment to check this product's availability.

SKU: MS 362 C-M VW

Description

Displacement (cc) 59.0
Weight (kg / lbs) 5.7 / 12.6
Guide Bar Lengths (Recommended ranges) 16″ – 24″
Chain Oil Capacity (oz) 11.0
Fuel Capacity (oz) 20.3
Chain 33RS60E (16″) / 36RS66E (18″) / 33RS72E (18″) / 33RS84E (24″)
Power Output (kW) 3.5

Standard features

  • STIHL M-Tronic (M)Zoom
    STIHL M-Tronic (M)

    Fully electronic controlled ignition timing and fuel metering system. The engine management STIHL M-Tronic (M) system ensures optimum engine performance, constant maximum speed and excellent acceleration. Manual carburetor adjustments are not necessary.

  • Heated carburetor (V)Zoom
    Heated carburetor (V)

    By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.

  • STIHL anti-vibration systemZoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

  • Reduced-emission engine technologyZoom
    Reduced-emission engine technology

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Electrically heated handles (W)Zoom
    Electrically heated handles (W)

    More comfort in cold weather. The heated handles (W) can be engaged with a switch on the left handle as required.

  • Advanced combustion technologyZoom
    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

  • Pre-separation air filtration systemZoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • STIHL ElastoStartZoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • Tool free fuel capsZoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

  • Decompression valveZoom
    Decompression valve

    The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

  • STIHL Ematic SystemZoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • Side-mounted chain tensioningZoom
    Side-mounted chain tensioning

    The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

  • Controlled-delivery oil pumpZoom
    Controlled-delivery oil pump

    The exact chain oil output can be adjusted manually for varying conditions, allowing for a reduction of up to 50%.